A method of technologic audit of technical re-equipment projects in aircraft production enterprises

A method of technologic audit for technical re-equipment of enterprises is considered. The method developed is intended to verify technological solutions of projects of technical re-equipment of enterprises according to indicators of productivity.     

光纤陀螺的温度实验与仿真分析

热致非互易相移的存在影响了光纤陀螺的工作精度.通过对热致非互易相移的分析,把握了该相移与光纤陀螺温度特性的关系.在此基础上,进行了光纤陀螺的温度实验与仿真分析.结果表明,仿真分析光纤陀螺的整体温度分布是可行的;温度实验与仿真分析相结合的办法有助于光纤陀螺温度特性的把握.     

异种金属材料磁脉冲焊接技术

通过对磁脉冲焊接技术结合机理的阐述,采用5A03Al-5A06Al、1050Al-AZ31Mg异种金属材料进行焊接试验.对所得的焊接接头进行气密性试验和剥离试验,检测其结合质量;结合光学显微镜,对比分析Al-Al、Al-Mg焊接接头的微观形貌特点;并采用SEM/EDS分析界面附近的元素分布;最后通过硬度试验,检测接头界...     

多孔质节流空气静压轴承静态性能实验研究

本文采用不锈钢多孔质材料研制了一种新的空气静压轴承,并对不同平均孔径的多孔质空气静压轴承以及一种表面复合节流空气静压轴承的承载能力和刚度进行了实验测试和分析,结果表明,选用合适的不锈钢多孔质材料以及适当的加工方法可以制造高承载能力与高刚度的空气静压轴承。     

皖南机床数控龙门铣床用途与特点

黄山皖南机床生产的数控龙门铣床主要用于各种模具制造、各种基础大件、壳体件等多品种零件的加工,工件一次装夹后可自动高效、高精度地连续完成铣、镗、铰、攻丝等多种工序的加工.适用于汽车模具、重型机械、机车、造船、发电、机床、印刷、轻纺、航空航天等制造行业,配备多功能铣头后,可对工作进行五面体加工,以及对各种复杂型面进行三坐标加工.该机床主要有以下特点.     

支线发动机维修

未来十年,支线发动机维修企业将面对新机型投入运营和老旧飞机淘汰等诸多状况。在此期间,将有三种新支线喷气投入商业运营:以SaM146为动力的苏霍伊超级喷气机SSJ100;以普惠公司的PW1000GTF发动机为动力的三     

飞机液压系统中污染物的分析与控制

着重分析了飞机液压系统污染物的来源、生成及其危害,提出了对于控制飞机液压系统污染物的几点粗浅体会,对提高飞机液压系统的可靠性及使用寿命具有参考价值。     

Improved rainfall estimation over the Indian region using satellite infrared technique

The GOES Precipitation Index (GPI) technique (Arkin, 1979) for rainfall estimation has been in operation for the last three decades. However, its applications are limited to the larger temporal and spatial scales. The present study focuses on the augmentation on GPI technique by incorporating a moisture factor for the environmental correction developed by Vicente et al. (1998). It consists of two steps; in the first step the GPI technique is applied to the Kalpana-IR data for rainfall estimation over the Indian land and oceanic region and in the second step an environmental moisture correction factor is applied to the GPI-based rainfall to estimate the final rainfall. Detailed validation with rain gauges and comparison with Tropical Rainfall Measuring Mission (TRMM) merged data product (3B42) are performed and it is found that the present technique is able to estimate the rainfall with better accuracy than the GPI technique over higher temporal and spatial domains for many operational applications in and around the Indian regions using Indian geostationary satellite data. Further comparison with the Doppler Weather Radar shows that the present technique is able to retrieve the rainfall with reasonably good accuracy.     

Changes in hyperspectral reflectance signatures of lettuce leaves in response to macronutrient deficiencies

The adaptation of specific remote sensing and hyperspectral analysis techniques for the determination of incipient nutrient stress in plants could allow early detection and precision supplementation for remediation, important considerations for minimizing mass of advanced life support systems on space station and long term missions. This experiment was conducted to determine if hyperspectral reflectance could be used to detect nutrient stress in Lactuca sativa L. cv. Black Seeded Simpson. Lettuce seedlings were grown for 90 days in a greenhouse or growth chamber in vermiculite containing modified Hoagland’s nutrient solution with key macronutrient elements removed in order to induce a range of nutrient stresses, including nitrogen, phosphorus, potassium, calcium, and magnesium. Leaf tissue nutrient concentrations were compared with corresponding spectral reflectances taken at the end of 90 days. Spectral reflectances varied with growing location, position on the leaf, and nutrient deficiency treatment. Spectral responses of lettuce leaves under macronutrient deficiency conditions showed an increase in reflectance in the red, near red, and infrared wavelength ranges. The data obtained suggest that spectral reflectance shows the potential as a diagnostic tool in predicting nutrient deficiencies in general. Overlapping of spectral signatures makes the use of wavelengths of narrow bandwidths or individual bands for the discrimination of specific nutrient stresses difficult without further data processing.     

Potential of salt-accumulating and salt-secreting halophytic plants for recycling sodium chloride in human urine in bioregenerative life support systems

This study addresses the possibility of growing different halophytic plants on mineralized human urine as a way to recycle NaCl from human wastes in a bioregenerative life support system (BLSS). Two halophytic plant species were studied: the salt-accumulating Salicornia europaea and the salt-secreting Limonium gmelinii. During the first two weeks, plants were grown on Knop’s solution, then an average daily amount of urine produced by one human, which had been preliminarily mineralized, was gradually added to the experimental solutions. Nutrient solutions simulating urine mineral composition were gradually added to control solutions. NaCl concentrations in the stock solutions added to the experimental and control solutions were 9 g/L in the first treatment and 20 g/L in the second treatment. The mineralized human urine showed some inhibitory effects on S. europaea and L. gmelinii. The biomass yield of experimental plants was lower than that of control ones. If calculated for the same time period (120 d) and area (1 m²), the amount of sodium chloride taken up by S. europaea plants would be 11.7 times larger than the amount taken up by L. gmelinii plants (486 g/m² vs. 41 g/m²). Thus, S. europaea is the better choice of halophyte for recycling sodium chloride from human wastes in BLSS.